I. Purpose & Scope

To safely and effectively provide instruction on the inspection and proper use of staple gun.

II. Definitions

Standards PPE – High Viz Garment, Hard Hat, Z-87.1 Safety Glasses, Gloves, Pants, Work Boots

III. Process

NOTE: Work instruction does not supplement the manual. For specific instructions for the exact model please refer to the owner’s manual. 

A. Potential Hazards

• Puncture Hazards
• Electric Shock Hazard
• Flying Objects Hazard

B. PPE

• Standard PPE

C. Inspection

1. Inspect for damage

D. Use

To Load

1. Remove pusher rod from machine.
2. Insert strip of staples.
3. Replace pusher rod.

To How to Determine Staple Shortage for Refill

1. Press latch to release pusher rod.
2. Lightly push rod forward until it stops. Visible projected part of rod indicates amount of staples remaining in track.

How to Determine Proper Staple Leg Size

1. In choosing the proper staple leg length for a job there are two basic things to consider:
   • Thickness of material to be stapled
   • Hardness of material

Staple Penetration

1. Raise the rear of the gun slightly off the work and bear down on the front end to prevent recoil when operating.
2. Squeeze the handle to discharge the staple.

E. Maintenance

Daily

1. Wipe clean with a dry cloth. Do not use harsh chemicals.
2. Clean staple channel by removing the pusher rod, removing the screw and nut and pulling down the entire inside frame.