Reciprocating Saw Usage

Document ID:
  • FO-WI-00096
Department Owner:
Training
Effective Date:
06/22/2021
Revision:
1

I. Purpose & Scope

To safely and effectively provide instruction on the inspection and proper use of reciprocating saws.

II. Definitions

Standard PPE – High Viz Garment, Hard Hat, Z-87.1 Safety Glasses, Gloves, Pants, Work Boots

III. Process

NOTE: Work instruction does not supplement the manual. For specific instructions for the exact model please refer to the owner’s manual. 

A. Potential Hazards

  • Flame and/or explosion hazard
  • Electrical Hazard
  • Hearing Hazard
  • Atmosphere Hazard

B. PPE

  • Standard PPE
  • Hearing Protection
  • Respiratory Protection – Recommended

C. Inspection

  1. Inspect for any cracks or damage.
  2. Inspect blades for missing teeth or damage.

D. Use

  1. To unlock the trigger switch, press the lock-off button.
  2. Pull the switch to turn the motor on.
  3. Releasing the trigger switch turn the motor off.
  4. To lock the trigger switch, press the lock-off button. Always lock the trigger switch when carrying or storing the tool.
  5. Ensure material to be cut is visible within all 360 degrees.
  6. Blade shall only cut what is intended and cannot be allowed to cut into the soil.

E. Maintenance

  1. Clean dirt and grease from the exterior of the tool (not the blade) using a cloth or soft non-metallic brush after each use. Do not use water or any cleaning solutions.
Share this guide