I. Purpose & Scope

To safely and effectively provide instruction on the inspection and proper use of impact drivers.

II. Definitions

Standard PPE – High Viz Garment, Hard Hat, Z-87.1 Safety Glasses, Gloves, Pants, Work Boots

III. Process

NOTE: Work instruction does not supplement the manual. For specific instructions for the exact model please refer to the owner’s manual. 

A. Potential Hazards

• Electrical Hazard
• Flame and/or Explosion Hazard
• Flying Objects Hazard
• Hazardous Atmosphere
• Hearing Hazard
• Vibration Hazard
• Burn Hazards

B. PPE

• Standard PPE
• Hearing Protection
• Respiratory Protection – Recommended

C. Inspection

1. Inspect tool for damage, cracks, misalignment or binding of moving parts or any other condition that may affect the tools operation
2. Check that cutting tools are sharp and clean.

D. Use

1. Hold power tools by insulated gripping surfaces, or the auxiliary handles supplied with the tool.
2. To turn the tool on press the switch to the on position. Do not force the power tool.
3. To turn the tool off press the switch to the off position.

E. Maintenance

1. Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around air vents. Never use solvents or other harsh chemicals to clean the tool.