I. Purpose & Scope

To safely and effectively provide instruction on the inspection and proper use of gas cans.

II. Definitions

Standard PPE – High Viz Garment, Hard Hat, Z-87.1 Safety Glasses, Gloves, Pants, Work Boots

III. Process

NOTE: Work instruction does not supplement the manual. For specific instructions for the exact model please refer to the owner’s manual. 

A. Potential Hazards

• Flame and/or explosion

B. PPE

• Standard PPE

C. Inspection

1. Inspect for damage, cracks or rust.
2. Ensure spark arrestor is still in place.

D. Use

1. Discharge static electricity by touching metal such as a car door.
2. Place can on the ground at a safe distance from moving or parked vehicles and people.
3. Touch the gas pump nozzle to the side of the can, then place nozzle in can, ensure proper grounding and bonding.
4. Fill the can slowly to prevent splashing and overflow, leaving a few inches of space for fume expansion.
5. Close lid tightly and clean off any spills.
6. When pouring from gas can ensure you are using a funnel and that the funnel is not made of paper.

E. Maintenance

No maintenance required for this tool.